Start The Welch Allyn Aed 10 - Welch Allyn AED 10 User Manual

26 Using the Defibrillator
RA
3. Peel off the backing from the electrode pad labeled LL. Place this pad over the ribs on
the patient's left side below the breast (apex) as depicted on the pad placement
illustration.
4. Plug the pad connector into the Welch Allyn AED 10 on the left side of the unit.
Note If the pads are not properly applied or if the cable is not properly connected to the
Welch Allyn AED 10, it will alert the user with text and voice.
"Apply pads to patient's bare chest and connect the cable. "

Start the Welch Allyn AED 10

Push the green ON/OFF button next to the large number "1" to power-on the Welch Allyn
AED 10.
LL
Connect the cable from the
defib pads
AED10
ON/OFF button
AED10
Welch Allyn AED 10 Automatic External Defibrillator