Set Samba - Digi ConnectPort LTS8 Command Reference Manual

Command descriptions

set samba

Purpose
Configures and displays Samba service settings.
Required permissions
Permissions must be set to one of the following:
For a user to display the Samba settings: "set permissions s-service=read"
n
For a user to display and set the Samba settings:
n
"set permissions s-service=rw"
Syntax
Configure Samba settings
set samba [state={off|on}]
[server={ hostname | ip address }]
[path= path ]
[timeout=5-3600]
[interval=5-3600]
[user= username ]
[password= password ]
[alert state={off|on}]
[alert description= string ]
[alert priority={normal|high}]
[alert type={email|snmptrap|all}]
[alert subject= string ]
[alert to= email address ]
[alert cc=email address ]
Display current settings
set samba
Options
state={off|on}
Specifies whether the Samba service will be enabled
on
Enable the Samba service.
off
Disable the Samba service.
Default is off.
server={hostname|ip address}
ConnectPort® LTS Command Reference
set samba
104