Set Sysauth - Digi ConnectPort LTS8 Command Reference Manual

Command descriptions

set sysauth

Purpose
Configures or displays authentication settings for the command-line interface or web server. The
following authentication options are provided:
Local
n
Radius
n
LDAP
n
Required permissions
Permissions must be set to one of the following:
For a user to display the authentication settings for CLI or Web server:
n
"set permissions s-sysauth=read"
For a user to display and set the authentication settings for CLI or Web server:
n
"set permissions s-sysauth=rw"
Syntax
Configure authentication settings of CLI or Web server
set sysauth index=(1-2)
authmethod={local|radius_server|
radius local|local radius|radius down local|
ldap_server|ldap_local|local_ldap|
ldap_downlocal}
[accountingsocket=0-65535]
[authsocket=0-65535]
[primary authsvr={ hostname | ip address }]
[secondary authsvr={ hostname | ip address }]
[primary_acctsvr={ hostname | ip address }]
[secondary acctsv={ hostname | ip address }]
[secret= password ]
[timeout=0-300]
[retries=1-50]
[searchbase= string ]
[domainname={ hostname | ip address }]
[ldapsecopt={off|start tls}]
Display current authentication settings of CLI or Web server
set sysauth
Options
index=1-2
ConnectPort® LTS Command Reference
set sysauth
131