Display - Digi ConnectPort LTS8 Command Reference Manual

Command descriptions

display

Purpose
Displays status information for the device. The "display" command's focus is on real-time information.
In contrast, the "info" command displays statistical information about a device over time, while the
"status" command displays the status of outgoing connections (connections made by "connect,"
"rlogin," or "telnet" commands). Status information that can be displayed includes:
General product information, including the product name, MAC address, boot, post, and
n
firmware versions, memory usage, CPU utilization, and uptime, or the amount of time since the
device was last booted.
Access control status information.
n
ARP table information.
n
Contents of a port buffer (see also "display buffers").
n
Serial modem signals (DTR, RTS, CTS, DSR, DCD).
n
Socket status information.
n
Current TCP and UDP session and listener information.
n
Uptime information only.
n
Version information for Boot, firmware, and Digi part numbers for those items.
n
Required permissions
For products with two or more users, permissions must be set to "set permissions display=execute"
to use this command. See "set permissions" for details on setting user permissions for commands.
Syntax
display {arp|buffers|device|dnsserver|memory|
netdevice|proxyarp|serial|sockets|tcp|udp|
uptime|versions|xbee {refresh|clear}}
Options
arp
Displays ARP table entries.
buffers
Displays the contents of a port buffer. This option is covered in more detail in "display buffers".
device
Displays general product information including product name, MAC address, boot, and firmware
versions, memory usage, CPU utilization, and uptime. The information displayed by this option is the
same as that displayed by the "info device" command (see "info")
dnsserver
ConnectPort® LTS Command Reference
display
24