Set Group - Digi ConnectPort LTS8 Command Reference Manual

Command descriptions

set group

Purpose
Used to create and manage user groups. You can use "set group" to do the following:
Add a group. A maximum of 32 groups can be defined.
n
Remove groups.
n
Change group configuration attributes.
n
Display group configuration attributes.
n
To apply a common set of user settings to more than one user, it may be desirable to create a group
with the required settings and then associate that group with multiple users. If a user is a member of
one or more groups, the user's effective permissions are the maximum of the permissions of the user
and all of the groups to which the user belongs.
Required permissions
For products with two or more users, permissions must be set to "set permissions s-group=read" to
display group configuration attributes, and "set permissions s-group=rw" to display and set group
configuration attributes. See "set permissions" for details on setting user permissions for commands.
Syntax
Add a group
set group add id= number newname= string
Remove a group
set group remove {id= range |name= string }
Change group configuration attributes
set group {id= range |name= string } [newname= string ]
Display group configuration attributes
set group {id= range |name= string }
Display group configuration attributes for all groups
set group
Options
add
Add a group. New groups are created with no permissions. A maximum of 32 groups can be defined.
remove
Remove groups.
ConnectPort® LTS Command Reference
set group
62