Convection Roast And Probe Mode - Thermador CJ302 Care & Use Manual

Proof 9-21-99

Convection Roast and Probe Mode

To Set the CONVECTION ROAST and PROBE Mode:
• Do not preheat.
• Use CONVECTION ROAST when roasting tender cuts of meat or poultry of any size.
• Roast in a low-sided pan and uncovered.
1. Insert the probe into the thickest part of the
Meat. Push the plug into the oven receptacle.
2. Select OVEN.
• Select twice for LOWER oven.
3. Select CONVECTION and ROAST.
The temperature is automatically set at 325°F.
4. Optional step:
To change the temperature from 325ºF, select
another temperature immediately before starting.
5. Select PROBE.
The probe temperature is automatically set at
160°F. and continues to be displayed instead of
the oven temperature.
6. To change the probe temperature from 160ºF,
select another temperature immediately before
starting.
7. Select START.
The temperature display alternates between the
set probe temperature and the actual meat item
temperature, increasng in 5ºF increments starting
with 100ºF. Touch CONVECTION to check the
oven temperature setting when using the probe. The oven temperature is displayed for 5 seconds before the
probe display continues. The oven chimes 3 times when the meat item is cooked. End is displayed as the heat
turns off.
• Use the 2-piece broil pan with the top grid for roasting uncovered.
• Use the PROBE or a meat thermometer to determine the internal doneness or "End " temperature. (See chart)
• After removing the item from the oven, cover loosely with foil for 10 to 15 minutes before carving.
• While covered, small roast temperatures increase 5ºF and large roast increase 10ºF.
• When roasting whole chickens or turkey, do not tie or truss legs.
UPPER
LOWER
CONVECTION
ROAST
PROBE
CONVECTION ROAST TIPS
Page 42
– Lower Oven
Touch
Touch
and
CONVECTION
ROAST
Touch
3
5
0
CONVECTION
ROAST
Touch
Touch
1
4
5
Touch
START
You Will See
o
325
o
350
o
160
PROBE
o
145
PROBE
o o
100 /145