Setting The Clock; Setting The Lights - Thermador CJ302 Care & Use Manual

Hide thumbs Also See for CJ302:

Care and use manual (68 pages)

Installation instructions manual (8 pages)

Installation instructions manual (8 pages)

Table Of Contents

Table of Contents

Proof 9-21-99

To Set the CLOCK:

•

Always set the clock immediately after installation

or after a power failure. Once power returns to

the oven, the clock displays the time of day when

power was turned off or lost.

1. Select the CLOCK pad.

2. Set the current time of day.

(Example shows 8 o'clock set for

the time of day.)

3. Select START or CLOCK.

•

Oven lights turn on automatically when the door is opened and off when closed.

•

To set manually, always start by highlighting the oven, whether it is "active" or not.

(Touch the UPPER / LOWER pad to display the "active" oven; flashing outline is the active oven.)

•

A single LIGHT pad activates the lights in either oven.

To manually control the interior oven lights if

either oven is in use:

1. Select the "active" oven by touching once or

twice to highlight oven display.

2. Touch once to turn light on or off.

To manually control the upper oven lights if

both ovens are in use:

1. The Upper oven lights are always on when the

oven is being used.

2. To manually turn them off, select UPPER /

LOWER until upper oven is highlighted.

3. Touch once to turn light on or off.

To manually control the lower oven lights if

both ovens are in use:

1. Select UPPER / LOWER until lower oven is high-

lighted in the display.

2. Touch once to turn light on or off.