Setting The Clock; Setting The Lights - Thermador DM301 Care And Use Manual

Oven Operations
Built-in DM Oven Care andUseManual
the Timer
(Continued from previous page)
To Cancel an Active Timer:
Select TIMER 1 OFF or TIMER 2 OFF.
To Set Both TIMER 1 and TIMER 2:
, Follow the steps above to set each Timer. The Timer with the least amount of countdown time has display priority. The countdown
display for the second timer is shown automatically when the first timer has ended.
. The words "TIMER 1" and "TIMER 2" are both displayed along with the number countdown,
. The designation, "TIMER 1" or 'TIMER 2" with the least remaining countdown time is more brightly lit than the other word.
. During the countdown, touch CLOCK or TTMER. Depending on the pad touched, either the time of day or the remaining time is
briefly displayed,
To Change a Timer:
i. Touch T%MER i or T[MER 2.
2. Enter the new desired time,
3. Touchthe START pad.
the Clock
. Always set the clock after installation or after a power failure.
Once power returns to the oven, the clock displays the time of
day when power was turned off or lost.
. The Time of Day clock can be set while an automatic timed
cooking mode is in operation.
. If 10 seconds elapse between touching the clock pad or number
pads, the oven will beep two times as a reminder,
. After 5 more seconds, the clock pad will stop flashing and the
original time will be displayed.
To Set the Clock:
1. Touch the CLOCK pad.
Message scrolls in display:
ENTER TIiTE O F OR_'THEIX _gL/EH5TRRT
2. Set the current time of day.
Message scrolls in display:
ENTER TIiTE O F ORffTHEIX _gL/EH5TRRT
3. Touch START or CLOCK.
Setting the
Touch OVEN LIGHT pad once to turn light on or off,
The lights do not operate in the Self Clean mode,
10