Paper Skew - Kyocera ECOSYS P2235dw Service Manual

(1-19) Paper skew

Step Check description
1 Re-setting the guide
2 Checking the guide
(1-20) Uneven transfer
Step Check description
1 Cleaning the transfer roller The transfer roller is dirty.
2 Replacing the transfer
roller
3 Replacing the high voltage
PWB
4 Replacing the fuser unit
Assumed cause
The guide is not aligned to
the paper size.
The guide is not attached
properly or faulty.
Assumed cause
The transfer roller is faulty
or not attached properly.
The high voltage contact
on the high voltage PWB is
deformed or broken.
The roller, drive section or
fuser pressure release
mechanism is deformed or
worn down.
7-11
2RV/2RW/2RX/2RY/3RA-3
Measures
Align the paper width guide,
paper guide (MP tray) or PF
paper width guide (paper
feeder) to the paper size and
re-load paper.
Reattach the paper width
guide, paper guide (MP tray)
or PF paper width guide
(paper feeder). If not
repaired, replace it.
Measures
Clean the transfer roller if the
image failure appears in the
circumference interval.
Correct the deformation of
the press spring. If not
repaired, replace the transfer
roller.
Replace the high voltage
PWB.
Replace the fuser unit.
Reference
Reference