Conveying/Transfer And Separation Section - Kyocera ECOSYS P2235dw Service Manual

(5) Conveying/Transfer and Separation section

Conveying section conveys paper to the transfer and separation section after adjusting the paper position at
the registration rollers.
The transfer and separation section consists of the transfer roller and separation needles attached to the
paper conveying unit. The DC bias is impressed to the transfer roller by the high-voltage PWB (HVPWB), and
the toner image formed on the drum is transferred to the paper by the potential gap. Then,, the paper is sep-
arated by the drum curvature separation. and discharged by the grounded separation brush *1
*1: 100V model applies DC voltage.
Components parts
1. registration roller
2. Registration pulley
3. Actuator
(Registration sensor)
4. Transfer front guide
5. Transfer roller
6. Separation brush
7. Conveying guide
8. Drum
3
Figure 3-31
8
1
2
3
Figure 3-32
3-30
1 8
2 4 5 6
7
6
5
4
2RV/2RW/2RX/2RY/3RA
7