Kyocera ECOSYS P2235dw Service Manual page 179

(The first page)
The first line: "FW-Update"
Page number/total page number and upper and
lower key icon are displayed.
The second line: "Completed" (Completion message)
(The second and subsequent page)
The first line: "CTRL", (the character string applicable to the
update target)
Page number/total page number and upper and lower
key icon are displayed.
The second line: (updated version)
*: When there is no applicable master file, "No Change" is dis-
played.
*: "*" is displayed after the update target name when it has been
skipped.
7. Check if the new firmware versions are displayed.
8. Unplug the power cord and disconnect the USB memory.
9. Connect the power cord and turn the power switch off after checking that "Ready to copy" is displayed.
In case of any error (the error which can not read a file), the process is interrupted immediately and the com-
pletion is displayed without executing the subsequent firmware update.
(The first page)
The first line: "FW-Update"
Page number/total page number and upper and lower
key icon are displayed.
The second line: "Error"
(The second and subsequent page)
The first line: "ENGN", (the character string applicable to the
update target)
Display page number/total page number, upper and
lower key icon
The second line: "Error", error code
Error code
Code
0000 Others
0100 There is no master file.
0200 Master file version discrepancy
03xx *4 There is no download file (No.xx).
04xx *4 File (No.xx) check sum discrepancy
05xx *4 File (No.xx) preparation failure
Error contents Code
S000 Other signature verification error
S001 The signature verification file is insuffi-
cient.
N001 Unable to connect the network *2
(There is no target to update.)
N002 Can not connect to the network *3
(There is the target to update.)
5-3
2RV/2RW/2RX/2RY/3RA
FW-Update 1/10
Completed
[CTRL] 2/10
2RB_2000.001.005
[ENGN] 9/10
No Change
[CTRL] 2/10
2S1_2000.001.005
FW-Update 1/10
Error
[ENGN] 10/10
Error 0100
Error contents