Paper Jam Due To The Wave Or Curl In The Fuser Section Of The Damp Paper - Kyocera ECOSYS P2235dw Service Manual

(1-2) Paper jam due to the wave or curl in the fuser section of the damp paper

Step Check description
1 Re-loading paper
2 Re-loading paper
3 Replacing the paper
(1-3) Paper jam due to dog-ear, skew, crease. fusing failure, curl, etc.
Step Check description
1 Checking the paper path
and the paper
2 Changing the settings
(1-4) Paper jam due to the guide factor
Step Check description
1 Checking the paper path
2 Cleaning the guide and
separation needle
3 Reattaching / replacing the
guide
4 Checking the solenoid
Assumed cause
The paper curls.
The paper fanning is not
enough.
The paper is damp.
Assumed cause
Paper is caught up by a
piece of paper or paper
leading edge is bent.
Media type is not set prop-
erly.
Assumed cause
The paper is caught with a
piece of paper, etc.
The guide and separation
needle are dirty.
The guide does not prop-
erly operate due to the
incorrect attachment or a
fault.
The solenoid does not
operate properly.
7-25
2RV/2RW/2RX/2RY/3RA-3
Measures
Reload paper upside down.
Fan the paper well and load it
by reversing the paper direc-
tion
Replace the paper.
Measures
If there is a piece of paper,
foreign object or burr on the
part on the conveying path,
remove them. If the paper
leading edge is bent, remove
the paper.
Select the proper media type
in the system menu.
Measures
If there is a piece of paper,
foreign object or burr on the
part on the conveying path,
remove them.
If the guide or separation
needle is dirty with toner or
paper dust, clean it with a
cleaning cloth or brush.
If the guide does not
smoothly move manually,
reattach it. If not repaired,
replace it.
Test print and check the
guide operation with the
operation sound. If the guide
does not operate or it is not
smooth, reattach the guide. If
not repaired, replace the
solenoid.
Reference
Reference
Reference