Print Out Is Not Available From The Printer Driver Setting Factor (4) - Kyocera ECOSYS P2235dw Service Manual

(23)Print out is not available from the printer driver setting factor (4)

Printer port supporting the network print is not selected or not set up properly.
Step Check description
1 Correcting the IP address
(24)Print out is not available from the printer driver setting factor (5)
The incorrect printer driver was selected.
Step Check description
1 Installing the printer driver
(25)Print out is not available from the printer driver setting factor (6)
Installed printer driver shows "Deleting" and it remains when reinstalling it
Step Check description
1 Cancelling the job
2 Uninstalling the printer
driver
3 Restarting the print
4 Correcting the IP address
5 Adding the Standard TCP/
IP port
Assumed cause
The IP address is not prop-
erly set.
Assumed cause
The incorrect printer driver
is selected.
Assumed cause
The print jobs remain in
the spool inside the printer
driver.
There is the unused printer
driver.
The system is pausing.
The IP address is not prop-
erly set.
No Standard TCP/IP port is
available for the main unit
IP address.
7-107
2RV/2RW/2RX/2RY/3RA-3
Measures
Check if the main unit IP
address displayed on the sta-
tus page and system menu
matches the one at the [Port]
tab of [Printer Properties] of
the PC. If not, correct the IP
address at the PC.
Measures
Select the proper printer
driver. If there is no proper it
on the PC, install the printer
driver which supports the
main unit of the destination of
outputting the data.
Measures
Cancel all the print jobs
spooled in the printer driver.
Delete the unused printer
driver.
Right click the pausing printer
icon and select [Print resum-
ing]. Then, check the ready
port.
If local network is connected,
check the main unit IP
address with status page.
next, correct the IP address
at the [Port] tab of [Printer
Properties] of the PC.
Add the main unit IP address
in Standard TCP/IP port and
print Test Page
Reference
Reference
Reference