Error Messages - Kyocera ECOSYS P2235dw Service Manual

7-5 Error Messages

No.
(1) The [Add Paper] message appears while the paper is loaded on the MP tray
Content of Error Messages
(1) The [Add Paper] message appears while the paper is loaded on the MP tray
Step Check description
1 Checking the connection
2 Replacing the actuator
3 Checking the MP paper
sensor
4 Checking the main/engine
PWB
Contents
Assumed cause
The connector is not prop-
erly connected or the wire
is faulty.
The actuator is deformed.
The MP paper sensor is
not properly connected or
faulty.
The connector and FFC
are not connected properly
or the wire, FFC or PWB is
faulty.
7-109
2RV/2RW/2RX/2RY/3RA-3
Measures
Clean the terminal of the fol-
lowing wire connectors and
reconnect the connectors. If
there is no continuity, replace
the wire.
• MP paper sensor - Main/
engine PWB (YC6)
Replace the MP paper sen-
sor actuator.
Reattach the MP paper sen-
sor. If not repaired, replace it.
Reconnect the connector and
FFC that are connected to
the main/engine PWB. If the
wire is pinched or scratched,
or the FFC terminal is peel or
deformed, correct or replace
it. If not repaired, replace the
main/engine PWB.
Reference