Siemens Siprotec 7UM611 Manual page 247

C-I/O-2 Input / PCB layout for the C-I/O-2 board is shown in the following Figure.
Output Module
Figure 3-6
The relay contact for binary output BO17 can be configured as normally open or nor-
mally closed (see overview diagrams in Appendix A.2):
Table 3-10
7UM61 Manual
C53000-G1176-C127-3
Input/output board C–I/O-2 with representation of jumper settings required for
checking configuration settings
Jumper Setting for Relay Contact for Binary Output BO17
Jumper Normally open contactor Normally closed contact
X41 1–2
3.1 Mounting and Connections
Presetting
2–3 1–2
247