Contact Outputs; Virtual Outputs; Rxgoose Status - GE N60 Instruction Manual

CHAPTER 6: ACTUAL VALUES

6.2.6 Contact outputs

ACTUAL VALUES  STATUS  CONTACT OUTPUTS
 CONTACT OUTPUTS

The present state of the contact outputs is shown here. The first line of a message display indicates the ID of the contact
output. For example, 'Cont Op 1' refers to the contact output in terms of the default name-array index. The second line of
the display indicates the logic state of the contact output.
For form-A contact outputs, the state of the voltage and current detectors is displayed as Off, VOff, IOff, On, IOn, and VOn.
For form-C contact outputs, the state is displayed as Off or On.

6.2.7 Virtual outputs

ACTUAL VALUES  STATUS  VIRTUAL OUTPUTS
 VIRTUAL OUTPUTS

The present state of up to 96 virtual outputs is shown here. The first line of a message display indicates the ID of the virtual
output. For example, 'Virt Op 1' refers to the virtual output in terms of the default name-array index. The second line of the
display indicates the logic state of the virtual output, as calculated by the FlexLogic equation for that output.

6.2.8 RxGOOSE status

ACTUAL VALUES  STATUS  RxGOOSE STATUS
 RxGOOSE STATUS

The N60 is provided with optional IEC 61850 capability. This feature is specified as a software option at
the time of ordering. See the Order Codes section of chapter 2 for details.
The actual value does not consider RxGOOSE that are not configured or are not used by any RxGOOSE
All RxGOOSE Online
Input.
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
Cont Op 1

Off

Cont Op xx

Off
Virt Op 1

Off

Virt Op 96

Off
All RxGOOSE Online:

Yes
RxGOOSE 1:

Off

RxGOOSE 16:

Off
Range: On, Off, VOff, VOn, IOn, IOff
Range: On, Off, VOff, VOn, IOn, IOff
Range: On, Off
Range: On, Off
Range: Yes, No
Range: On, Off
Range: On, Off
STATUS
6
6-5