Display Properties - GE N60 Instruction Manual
Network stability and
synchrophasor measurement system
Hide thumbs
Also See for N60:
- Instruction manual (666 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (544 pages)
Table of Contents
Advertisement
CHAPTER 5: SETTINGS
— 16 bit unsigned
Activity Value
Enumeration Description
1
Authentication Failed
2
User Lockout
3
FW Upgrade
4
FW Lock
5
Settings Lock
6
Settings Change. Because this can fill the entire event log, it is supported by the
already existing Settings_Change.log file. This event is not required.
7
Clear Oscillography command
8
Clear Data Logger command (not applicable to all UR products)
9
Clear Demand Records command (not applicable to all UR products)
10
Clear Energy command (not applicable to all UR products)
11
Clear Unauthorized Access command
12
Clear Teleprotection Counters command (not applicable to all UR products)
13
Clear All Relay Records command
14
Role Log in
15
Role Log off
5.3.2 Display properties
SETTINGS PRODUCT SETUP DISPLAY PROPERTIES
DISPLAY
PROPERTIES
Some relay messaging characteristics can be modified to suit different situations using the display properties settings.
— This setting selects the language used to display settings, actual values, and targets. This setting displays
LANGUAGE
when a language other than English was purchased, and the range depends on the order code of the relay.
— Flash messages are status, warning, error, and information messages displayed in response to
FLASH MESSAGE TIME
certain key presses during settings programming. These messages override any normal messages. Use this setting to
change the duration of flash messages on the display.
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
LANGUAGE:
English
FLASH MESSAGE
TIME: 1.0 s
DEFAULT MESSAGE
TIMEOUT: 300 s
DEFAULT MESSAGE
INTENSITY: 25 %
SCREEN SAVER
FEATURE: Disabled
SCREEN SAVER WAIT
TIME: 30 min
CURRENT CUT-OFF
LEVEL: 0.020 pu
VOLTAGE CUT-OFF
LEVEL: 1.0 V
Range:
English; English, French; English, Russian; English,
Chinese; English, German (examples; depends on order code)
Visible when language other than English purchased
Range: 0.5 to 10.0 s in steps of 0.1
Range: 10 to 900 s in steps of 1
Range: 25%, 50%, 75%, 100%
Visible when a VFD is installed
Range: Disabled, Enabled
Visible when an LCD is installed
Range: 1 to 65535 min. in steps of 1
Visible when an LCD is installed
Range: 0.002 to 0.020 pu in steps of 0.001
Range: 0.1 to 1.0 V secondary in steps of 0.1
PRODUCT SETUP
5
5-25
Advertisement
Table of Contents
