Changing Settings - GE N60 Instruction Manual

FRONT PANEL INTERFACE
4.2.4.1 Example
 ACTUAL VALUES
 STATUS

 SETTINGS
 PRODUCT SETUP

 SETTINGS
 SYSTEM SETUP

 SECURITY


4
ACCESS LEVEL:
Restricted

 SECURITY


 DISPLAY
 PROPERTIES

FLASH MESSAGE
TIME: 10.0 s

4.2.5 Changing settings

4.2.5.1 Entering numerical data
Each numerical setting has its own minimum, maximum, and increment value associated with it. These parameters define
what values are acceptable for a setting.
FLASH MESSAGE
TIME: 10.0 s

MINIMUM: 0.5
MAXIMUM: 10.0
Two methods of editing and storing a numerical setting value are available.
• 0 to 9 and decimal point — The relay numeric keypad works the same as a calculator. A number is entered one digit at
a time. The leftmost digit is entered first and the rightmost digit is entered last. Pressing the
pressing the
ESCAPE
• VALUE keys — The
allowed. While at the maximum value, pressing the
upward from the minimum value. The
4-14
Press the MENU key until the header for the first Actual Values page appears. This page contains
system and relay status information. Repeatedly press the MESSAGE keys to display the other
actual value headers.
Press the MENU key until the header for the first page of Settings appears. This page contains
settings to configure the relay.
Press the MESSAGE down arrow to move to the next Settings page. This page contains settings
for System Setup. Repeatedly press the MESSAGE up and down arrows to display the other
setting headers and then back to the first Settings page header.
From the Settings page one header (Product Setup), press the MESSAGE right arrow once to
display the first sub-header (Security).
Press the MESSAGE right arrow once more and this displays the first setting for Security.
Pressing the MESSAGE down arrow repeatedly displays the remaining setting messages for the
Security sub-header.
Press the MESSAGE left arrow once to move back to the first sub-header message.
Pressing the MESSAGE down arrow displays the second setting sub-header associated with the
Product Setup header.
Press the MESSAGE right arrow once more to display the first setting for Display Properties.
For example, select the SETTINGS  PRODUCT SETUP  DISPLAY PROPERTIES  FLASH
MESSAGE TIME setting.
Press the HELP key to view the minimum and maximum values. Press the key again to view the
next context sensitive help message.
key, returns the original value to the display.
up arrow increments the displayed value by the step value, up to the maximum value
VALUE
down arrow decrements the displayed value by the step value, down to
VALUE
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
up arrow again allows the setting selection to continue
VALUE
CHAPTER 4: INTERFACES
left arrow or
MESSAGE