Stfp Sessions Form - RuggedCom RuggedBackbone RX1500 User Manual

2. System Administration
Figure 2.17. STFP Sessions form
The SFTP Sessions form sets the parameters for Secure File Transfer Protocol (SFTP) sessions.
enabled
Synopsis: boolean
Default: false
Enable/Disable the SFTP user interface
Listen IP
Synopsis: IPv4 address in dotted-decimal notation
Synopsis: IPv6 address in colon-separated hexadecimal notation
Default: 0.0.0.0
The IP Address the SFTP will listen on for SFTP requests (default 0.0.0.0).
Listen Port
Synopsis: unsigned short integer
Default: 2222
The port the SFTP will listen on for SFTP requests (default 2222).
Extra IP:Ports
Synopsis: A string
Synopsis: "extra-ip-ports" occurs in an array.
The SFTP will also listen on these IP Addresses:Port values. Add ':#' to set non-default port value
#. (ie. xxx.xxx.xxx.xxx:19343 [::] [::]:16000)
Maximum Number of SFTP Sessions
Synopsis: unsigned integer
Synopsis: - the keyword { unbounded }
Default: 10
The maximum number of concurrent SFTP sessions
ROX™ v2.2 User Guide 43 RuggedBackbone™ RX1500