Replaceable Parts Listings - Agilent Technologies E8362B Service Manual

Replaceable Parts

Replaceable Parts Listings

Replaceable Parts Listings
This section contains the replacement part numbers and their descriptions for your
Agilent PNA series microwave network analyzer. You can find the locations of replaceable
parts in this section:
• listed by reference designator in
• listed by the type of part in
Table 6-1 Location by Reference Designator
Reference
Designator Description
A1 Keypad assembly
A2 Display assembly
A3 Front panel interface board
A4 Power supply assembly
A6 Signal processing ADC module (SPAM) board
A8 Fractional-N synthesizer board
A9 Fractional-N synthesizer board (Option 080)
A10 Frequency reference board
A11 Phase lock board
A12 Source 20
Frequency offset receiver assembly
A13
(Option 080)
A14 System motherboard
A15 CPU board
A16 Test set motherboard
A17 Local oscillator multiplier/amplifier 10 (LOMA 10)
A18 Multiplier/amplifier (MA 20)
A19 Splitter
A20 Local oscillator distribution assembly (LODA)
Source multiplier/amplifier 50 (SOMA 50)
A21
(E8363B, E8364B only)
A22 Switch splitter
None Channel R1 30-dB attenuator (E8362B only)
None Channel R2 30-dB attenuator (E8362B only)
6-6
Table 6-1, or
Table 6-2.
PNA Series Microwave Network Analyzers
E8362B, E8363B, E8364B
a
Location
"Front Panel Assembly, All Options"
on page 6-10
"Top Assemblies, All Options Except
080" on page 6-12
"Top Assemblies, All Options Including
080" on page 6-16
"Top Assemblies, All Options Except
080" on page 6-12
"Top Assemblies, All Options Including
080" on page 6-16
"Top Assemblies, All Options Except
080" on page 6-12
"Bottom Assemblies, No Options"
on page 6-20
Service Guide E8364-90026