Mitsubishi Mirage 2017 Owner's Manual page 29

Table of Contents

Advertisement

Front seats
To adjust the seatbacks
To adjust the seatback, lean forward slightly,
gently pull the seatback lock lever up, then
lean backward to a comfortable position and
4
release the lever. The seatback will lock in
place.
CAUTION
 The reclining mechanism used in the seat-
back is spring loaded, and will cause the
seatback to return quickly to the vertical
position when the lock lever is operated.
When pulling the lever, sit close to the seat-
back or hold the seatback with your hand to
control its return motion.
4-4
Seat and restraint systems
WARNING
 To reduce the risk of serious injury or
N00402000369
death in the event of an accident or sud-
den stop, all seatbacks should be kept in
the upright position while the vehicle is in
motion.
Seat belt performance during an accident
can be adversely affected if the seatbacks
are reclined. The more a seatback is
reclined, the more likely seat belt perfor-
mance will be adversely affected. If the
seat belt is not properly positioned against
the body during an accident, there is
increased risk you will slide under the belt
and receive serious injury or death.
To adjust the seat height
(Driver's seat only, if so
equipped)
To adjust the seat height, turn the dial as
shown in the illustration.
1- To move the seat cushion up
2- To move the seat cushion down
Heated seats
(if so equipped)
The heated seats can be operated by pushing
the switch when the ignition switch or the
operation mode is in ON. The indicator light
(A) will illuminate while the heater is on.
N00402100243
N00435601418

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents