Mitsubishi Mirage 2017 Owner's Manual page 209

AM/FM electronically tuned radio with CD player (if so equipped)
18- RPT (Repeat) button
19- RDM (Random) button
To listen to a CD
To set a disc
1. Insert the disc with the label facing up.
When a disc is inserted, the CD indicator
will come on and the CD player will begin
7
playing even if the radio is being used.
The CD player will also start playback
when the MEDIA button is pressed with a
disc in the player or with a disc set in the
Disc-loading slot, even if the radio is
being used.
2. To stop the CD, turn off the power by
pressing the PWR switch for 2 seconds or
longer, or change over to the radio mode
by pressing the RADIO button, or eject
the disc by pressing the eject button.
NOTE
 For information on adjusting the volume and
tone, refer to "To adjust the volume" on page
7-20 and "To adjust the tone" on page 7-20.
 3 inches (8 cm) compact disc cannot be
played on this CD player.
 For information concerning the handling of
compact discs, refer to "Handling of com-
pact discs" on page 7-42.
7-22 Comfort controls
To eject a disc
When the CD eject button is pressed, the disc
automatically stops and is ejected.
N00735502114
NOTE
 If you do not remove the disc before 15 sec-
onds have elapsed, the CD player will auto-
matically reload the disc and stop.
To listen to a music CD
Press the MEDIA button if a disc is already in
the CD player. The CD player will enter CD
mode and start playback. The track number
and the playing time will appear on the dis-
play. The tracks in the disc will be played
continuously.
To listen to an MP3 CD
This CD player allows you to play MP3
(MPEG Audio Layer-3) files recorded on
CD-ROMs, CD-Rs (recordable CDs), and
CD-RWs (rewritable CDs) in ISO9660 Level
1/Level 2, Joliet, and Romeo formats. Each
disc can hold up to 255 files in up to 100 fold-
ers, up to a maximum of 16 levels. The ID3
tag information can be displayed during MP3
playback. For information concerning ID3
tags, refer to "CD text and MP3 title display"
on page 7-24.
1. Insert a disc containing MP3 files into the
slot.
2. Press the MEDIA button if a disc is
already in the CD player.
The display shows "READING", then
playback will begin.
NOTE
 While listening to a disc on which CD-DA
(CD-Digital Audio) and MP3 files have both
been recorded, you can switch between read-
ing of the CD-DA, reading of the MP3 files,
and the external audio input mode by press-
ing the MEDIA button for 2 seconds or lon-
ger (until you hear a beep).
For information on the external audio input,
refer to "To use the external audio input
function" on page 7-28.
 With a disc that contains both CD-DA and
MP3 files, the CD-DA files are automati-
cally played first.
 The playback sound quality differs depend-
ing on the encoding software and the bit rate.
For details, refer to the user manual of your
encoding software.
 Depending on file/folder configurations on a
disc, it may take some time before playback
starts.
 MP3 encode software and writing software
are not supplied with this unit.