Mitsubishi Mirage 2017 Owner's Manual page 151

Bluetooth® 2.0 interface (if so equipped)
2. Press the SPEECH button.
3. Say "Setup."
4. Say "Pairing Options."
5. The voice guide will say "Select one of
the following: pair, edit, delete, or list."
Say "Pair."
NOTE
5
 If 7 devices have already been paired, the
voice guide will say "Maximum devices
paired" and then the system will end the
pairing process. To register a new device,
delete one device and then repeat the pairing
process.
(Refer to "Selecting a device: Deleting a
device" on page 5-90.)
6. The voice guide will say "Please say a 4-
digit pairing code." Say a 4-digit number.
When the confirmation function is on, the
system will confirm whether the number
said is acceptable. Answer "Yes."
Answer "No" to return to pairing code
selection.
NOTE
®
 Some Bluetooth devices require a specific
pairing code. Please refer to the device man-
ual for pairing code requirements.
5-88 Features and controls
NOTE
 The pairing code entered here is only used
®
for the Bluetooth connection certification.
It is any 4-digit number the user would like
to select.
Remember the pairing code as it needs to be
®
keyed into the Bluetooth device later in the
pairing process.
Depending on the connection settings of the
®
Bluetooth device, this code may have to be
entered each time you connect the Blue-
® ®
tooth device to the Bluetooth
face. For the default connection settings,
refer to the instructions for the device.
7. The voice guide will say "Start pairing
procedure on the device. See the device
manual for instructions." Enter in the
®
Bluetooth device the 4-digit number you
have registered in Step 6.
NOTE
®
 Depending on the Bluetooth
device, it may
take a few minutes to pair it with the Blue-
®
tooth 2.0 interface.
®
 If the Bluetooth 2.0 interface cannot recog-
®
nize the Bluetooth device, the voice guide
will say "Pairing has timed out" and the pair-
ing process will be cancelled.
Confirm that the device you are pairing sup-
®
ports Bluetooth , and try pairing it again.
NOTE
 If you enter the wrong number, the voice
guide will say "Pairing failed" and the pair-
ing process will be cancelled.
Confirm the number is right, and try pairing
it again.
8. The voice guide will say "Please say the
name of the device after the beep." You
can assign a desired name for the Blue-
®
tooth device and register it as a device
tag. Say the name you want to register
2.0 inter-
after the beep.
NOTE
 When the confirmation function is on, after
repeating the device tag you have said, the
voice guide will ask "Is this correct?"
Answer "Yes."
To change the device tag, answer "No" and
then say the device tag again.
9. The voice guide will say "Pairing com-
plete," and the pairing process will end.