USB input terminal (if so equipped)
5
3. Connect the connector cable to the iPod.
NOTE
Use a genuine connector cable from Apple
Inc.
4. Connect the connector cable (D) to the
connector cable (B).
Be sure to hold the terminal part (A) of
the connector cable as shown in the illus-
tration.
5. Fix the connector cable (A, B) on the
clips.
5-104
Features and controls
WARNING
An open glove compartment door can
cause a serious injury or death to the front
passenger in an accident, even if the pas-
senger is wearing his/her seat belt. Always
keep the glove compartment door closed
when driving.
NOTE
When closing the glove compartment, be
careful not to trap the connector cable and
iPod.
To remove
1. Turn the ignition switch to the "OFF"
position or put the operation mode in
OFF.
2. Remove the connector cable (D).
Be sure to hold the terminal part (A) of
the connector cable as shown in the illus-
tration.
3. Fix the connector cable on the clips and
close the glove compartment.
Types of connectable devices
and supported file specifica-
tions
Device types
Devices of the following types can be con-
nected.
N00567000015
N00567101143