Mitsubishi Mirage 2017 Owner's Manual page 157

Bluetooth® 2.0 interface (if so equipped)
NOTE
 If you say "Call" when the vehicle phone-
book and the mobile phonebook are empty,
the voice guide will say "The vehicle phone-
book is empty. Would you like to add a new
entry now?"
Answer "Yes," and the voice guide will say
5
"Entering the phonebook - new entry menu."
You can now create data in the vehicle
phonebook.
Answer "No," the system will return to the
main menu.
3. After the voice guide says "Name please,"
say the name you want to call, from those
registered in the phonebook.
4. If there is only 1 match, the system will
proceed to Step 5.
If there are 2 or more matches, the voice
guide will say "More than one match was
found, would you like to call <returned
name>." If that person is the one you want
to call, answer "Yes."
Answer "No," the name of the next
matching person will be uttered by the
voice guide.
NOTE
 If you say "No" to all names read by the sys-
tem, the voice guide will say "Name not
found, returning to main menu" and the sys-
tem will return to the main menu.
5-94 Features and controls
5. If only 1 telephone number is registered
under the name you just said, the voice
guide will proceed to Step 6.
If 2 or more telephone numbers are regis-
tered that match the name you just said,
the voice guide will say "Would you like
to call <name> at [home], [work],
[mobile], or [other]?" Select the location
to call.
NOTE
 If the name you selected has matching data
in the vehicle phonebook but no telephone
number is registered under the selected loca-
tion, the voice guide
"{home/work/mobile/other} not found for
<name>. Would you like to add location or
try again?"
Say "Try again," and the system will return
to Step 3.
Say "Add location" and you can register an
additional telephone number under the
selected location.
 If the name you selected has matching data
in the mobile phonebook but no telephone
number is registered under the selected loca-
tion, the voice guide
"{home/work/mobile/other} not found for
<name>. Would you like to try again?"
Answer "Yes," and the system will return to
Step 3.
Answer "No," and the call will be cancelled.
Start over again from Step 1.
6. The voice guide will say "Calling <name>
<location>" and then the system will dial
the telephone number.
NOTE
 When the confirmation function is on, the
system will check if the name and location of
the receiver are correct. If the name is cor-
rect, answer "Yes."
To change the name or location to call,
answer "No." The system will return to Step
3.
Redialing
will say
You can redial the last number called, based
on the history of dialed calls in the paired cel-
lular phone.
Use the following procedure to redial.
1. Press the SPEECH button.
2. Say "Redial."
Send function
will say
During a call, press the SPEECH button to
enter voice recognition mode, then say
"<numbers> SEND" to generate DTMF
tones.
For example, if during a call you need to sim-
ulate the pressing of a phone button as a
response to an automated system, press the
N00565700018