Additional Keys; Customer Key Programming - Mitsubishi Mirage 2017 Owner's Manual

Additional keys

To add a key, you must already have 2 regis-
tered keys. You need to register the ID code
to the vehicle.
Registering the ID code can be done by your-
self (except for vehicles sold in Canada), or
by your authorized Mitsubishi Motors dealer.
For you to register the ID code yourself, fol-
low the "Customer key programming" proce-
dure below.
If you choose to have your authorized
Mitsubishi Motors dealer register the ID
code, take your vehicle and all remaining
keys to your authorized Mitsubishi Motors
dealer.
NOTE
 You are provided with 2 keys, but you may
register up to 8 keys.

Customer key programming

(Except for vehicles sold in
Canada)
You can program new keys to the system if
you have two valid (already registered) keys
and blank immobilizer key (specially cut for
your vehicle at your Mitsubishi Motors
dealer) by doing the following:
1. Insert the first valid key into the ignition
switch and turn the key to the "ON" posi-
tion for 5 seconds.
2. Turn the key to the "OFF" position and
remove the first key.
3. Within 30 seconds of removing the first
key, insert the second valid key into the
ignition and turn it to the "ON" position.
About 10 seconds later, the immobilizer
indicator will start to blink.
4. When the immobilizer indicator starts
blinking, turn the second valid key to the
"OFF" position and remove it. Within 30
seconds after doing so, insert a blank
immobilizer key into the ignition switch
and turn it to the "ON" position. Perform
this operation no more than 30 seconds
after the immobilizer indicator starts
blinking. When registration of the ID
code is complete, the immobilizer indica-
tor will come on for 3 seconds then go off.
If an error occurs, the immobilizer indica-
tor will go off during the procedure.
N00562200139
Electronic immobilizer (Anti-theft starting system)
NOTE
 When the key registration is completed, the
immobilizer indicator will come on within
30 seconds of turning the ignition switch to
the "ON" position with the blank immobi-
lizer key (specially cut for your vehicle at
your Mitsubishi Motors dealer).
5. If you wish to register another key, per-
form the process again from step 1.
NOTE
 It is not possible to register a key if:
• the immobilizer indicator goes off during
the procedure
• the immobilizer indicator does not come on
within 30 seconds after step 4.
 The procedure will be terminated automati-
cally if:
• a period of 30 seconds or longer elapses
from the moment when the first key is
turned to the "OFF" position to the moment
when the second key is turned to the "ON"
position
• a period of 30 seconds or longer elapses
from the moment when the second key is
turned to the "OFF" position to the moment
when the blank immobilizer key is turned
to the "ON" position
• more than 20 seconds elapses after the
immobilizer indicator starts blinking
Features and controls
5
5-5