Mitsubishi Mirage 2017 Owner's Manual page 103

Table of Contents

Advertisement

Continuously variable transmission (CVT) (if so equipped)
the selector lever in the "P" (PARK) position.
To move the selector lever from the "P"
(PARK) position to another position, follow
the steps below.
1. Press and hold the brake pedal down.
2. Move the selector lever to the desired
position.
5
NOTE
 The selector lever cannot be moved from "P"
(PARK) to another position if the ignition
switch is set to the "OFF" or "ACC" posi-
tion, or if the key has been removed, or oper-
ation mode is in "OFF" or "ACC", or if the
brake pedal is not pressed and held down.
The CVT selects an optimum ratio automati-
cally when the selector lever is in the "D"
(DRIVE) position, depending on the speed of
the vehicle and the position of the accelerator
pedal.
5-40
Features and controls
Set the selector lever in the gate to
operate while the brake pedal is
depressed.
Set the selector lever in the gate to
operate.
WARNING
 Always press the brake pedal when shift-
ing the selector lever into a selector posi-
tion from the "N" (NEUTRAL) position.
When beginning to drive, do not shift the
selector lever from the "N" (NEUTRAL)
position while pressing the accelerator
pedal. This will cause the vehicle to
"jump" forward or backward.
NOTE
 To prevent mistakes in operating the lever,
make sure you stop briefly at each position.
After operating, check the position in the
multi-information display.
 If the brake pedal is not depressed and held,
the shift-lock device activates to prevent the
selector lever from being moved from the
"P" (PARK) position.
 For a shift indicated by
in the illustra-
tion, depress the brake pedal before moving
the selector lever. If you attempt to move the
selector lever before depressing the brake
pedal, the selector lever may not move.
When the selector lever cannot be
shifted from the "P" (PARK) posi-
tion
When the selector lever cannot be shifted
from the "P" (PARK) position to another
position while the brake pedal is pressed and
held down with the ignition switch or the
operation mode in ON, the battery may be flat
or the shift-lock mechanism may be malfunc-
tioning.
Immediately have your vehicle checked by an
authorized Mitsubishi Motors dealer or a
repair facility of your choice.
N00563300049

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents