Mitsubishi Mirage 2017 Owner's Manual page 152

 Pairing procedure - Type 2
equipped)
1. Stop your vehicle in a safe area, put the
gearshift lever in the "N" (Neutral) posi-
tion (manual transaxle), or the selector
lever in the "P" (PARK) position (contin-
uously variable transmission (CVT)), and
pull the parking brake lever.
NOTE
®
 You cannot pair any Bluetooth
®
the Bluetooth 2.0 interface unless the vehi-
cle is parked. Before pairing a Bluetooth
®
device with the Bluetooth 2.0 interface,
confirm that the vehicle is parked in a safe
location.
2. Press the SPEECH button.
3. Say "Pair Device."
NOTE
(if so
 The following procedure (
be used instead of saying "Pair Device."
Replace this step 3 with the following proce-
dure if you prefer.
Say "Setup."
Say "Pairing Options."
The voice guide will say "Select one of
the following: pair, edit, delete, list or set
code."
Say "Pair."
 If 7 devices have already been paired, the
device with
voice guide will say "Maximum devices
paired" and then the system will end the
®
pairing process. To register a new device,
delete one device and then repeat the pairing
process.
(Refer to "Selecting a device: Deleting a
device" on page 5-90.)
4. The voice guide will say "Start pairing
procedure on the device. See the device
manual for instructions." and then will
say "The pairing code is <pairing code>."
NOTE
 Some Bluetooth
pairing code. Please refer to the device man-
ual for pairing code requirements and read
the next section "If your device requires a
specific pairing code" on page 5-90 to set the
pairing code.
Bluetooth® 2.0 interface (if so equipped)
 The pairing code entered here is only used
to ) can also
5. Enter in the Bluetooth
 Depending on the Bluetooth
 If the Bluetooth
®
devices require a specific
NOTE
®
for the Bluetooth connection certification.
Depending on the connection settings of the
®
Bluetooth device, this code may have to be
entered each time you connect the Blue-
® ®
tooth device to the Bluetooth 2.0 inter-
face. For the default connection settings,
refer to the instructions for the device.
®
device the 4-digit
number that has been read out in Step 4.
NOTE
®
device, it may
take a few minutes to pair it with the Blue-
®
tooth 2.0 interface.
®
2.0 interface cannot recog-
®
nize the Bluetooth device, the voice guide
will say "Pairing has timed out" and the pair-
ing process will be cancelled.
Confirm that the device you are pairing sup-
®
ports Bluetooth , and try pairing it again.
Features and controls
5
5-89