Mitsubishi Mirage 2017 Owner's Manual page 196

CAUTION
 Using recirculated air for a long time may
cause the windows to fog up.
Air conditioning switch
Push the switch, and the air conditioning
compressor will turn on. The air conditioning
indicator light (A) will come on.
Push the switch again and the air condition-
ing compressor will stop and the indicator
light (A) goes off.
Operating the air conditioning
system
Heating
N00731001488 Set the mode selection dial to the "
tion and set the air selection lever to the out-
side air position.
Turn the temperature control dial clockwise
or counterclockwise to the desired tempera-
ture. Select the desired blower speed to fit
your needs.
NOTE
 For quick heating, set the blower speed at the
3rd position.
Manual air conditioning (if so equipped)
Cooling
N00731101304
" posi-
1. Set the mode selection dial to the "
position.
2. Set the air selection lever to the outside air
position.
3. Push the air conditioning switch.
4. Change the temperature by turning the
control dial clockwise or counterclock-
wise.
5. Set the desired blower speed.
CAUTION
 The engine speed may increase when the air
conditioning (cooling or heating) is operat-
ing.
Since creeping will occur strongly if the
engine speed becomes high while the vehicle
with a CVT is stationary, fully depress the
brake pedal to prevent the vehicle from
creeping.
Comfort controls
N00731201376
7
"
7-9