Mitsubishi Mirage 2017 Owner's Manual page 213

AM/FM electronically tuned radio with CD player (if so equipped)
To adjust the clock
7
A- (Clock) button
B- SEL (Select) switch
C- SEL (Select) indicator
D- (Return) button
1. Press and hold the button and the clock
display flashes.
2. Turn the SEL switch to adjust the "hours"
digit.
3. When the "hours" digit is adjusted, press
the button to flash the "minutes" digit.
Turn the SEL switch to adjust the "min-
utes" digit.
4. When the time is set, press the
to stop the clock display from flashing.
7-26 Comfort controls
NOTE
 When operation of turn of the SEL switch is
N00702701034
enabled, the SEL indicator will appear on the
display.
 When the following operation is performed,
this mode will be canceled.
• The button is pressed until you hear a
beep.
• The button is pressed.
• The another mode is selected.
 Reset the time after the battery terminals are
disconnected and reconnected.
 Seconds do not appear in the clock display,
but after adjusting the "minutes" setting, the
clock begins to operate from 0 seconds.
button
To confirm the version number
of the Gracenote DB (vehicles
®
with a Bluetooth 2.0 interface)
A-
/MENU button
B- SEL (Select) switch
C- SEL (Select) indicator
D- (Return) button
1. Press and hold the /MENU button for 2
seconds or longer.
2. Turn the SEL switch or press the
/MENU button several times to select
"Gracenote DB" and then press the SEL
switch.
3. Turn the SEL switch to select "DB Ver-
sion" and then press the SEL switch. The
Gracenote DB version is displayed.
N00702801035