Copy Stack-Config Tftp Command - Avaya P333T User Manual

Example:
Cajun_P330-N#
for monitoring amir's computer" owner amir
event 1054 was created successfully

Copy stack-config tftp Command

Use the copy stack-config tftp command to upload the stack-level
parameters from the current NVRAM running configuration into a file via TFTP.
Note: Create the file into which you wish to upload the stack-level parameters prior
to executing this command.
The syntax for this command is:
copy stack-config tftp <filename> <ip>
filename
ip
Example:
Cajun_P330-N# copy stack-config tftp c:\conf.cfg 192.168.49.10
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'upload status' command
********************************************************************
* If you are currently running the P330 Device Manager application,*
* it is recommended to exit from it before performing configuration*
* download operations.
********************************************************************
Avaya P333T User's Guide
rmon event 1054 logAndTrap description "event
file name (full path)
The ip address of the host
Chapter 6 Cajun Campus CLI – Layer 2
*
109