Avaya P333T User Manual page 90

Chapter 6 Cajun Campus CLI – Layer 2
• set system contact
• set interface
• set interface ppp
• set port level
• set port
negotiation
• set port enable
• set port disable
• set port speed
• set port duplex
• set port name
• set port trap
• set port vlan
• set port vlan-
binding-mode
• set port static-
vlan
• set port self-loop
discovery
• set port channel
• set port
redundancy on/off
• set port redundancy
• set port mirror
• set port
classification
• set port spantree
76
Set the system contact person
Configure the management interface of
the device
Configure the device ppp interface
Set the priority level of a port
Set the autonegotiation mode of a port
Administratively enable a port
Administratively disable a port
Set the speed for a 10/100 port
Set the duplex mode of a port
Assign a name to a port
Enable/Disable the SNMP up/down
link traps sent for port
Assign the Port VLAN ID (PVID)
Define the port binding method
Define a multiple VLANs per port
Define a port's IBM token ring discovery
mode
Define a LAG interface
Define/Delete a link redundancy entry
Enables/Disables all the defined link
redundancy schemes
Set a port mirroring source-destination
pair in the stack
Set port classification to valuable or
regular
Enables or disables the spanning tree for
switch ports
Page 83
Page 83
Page 84
Page 85
Page 86
Page 86
Page 86
Page 87
Page 87
Page 87
Page 88
Page 88
Page 89
Page 89
Page 90
Page 90
Page 91
Page 91
Page 92
Page 92
Page 93
Avaya P333T User's Guide