Ipv6 Prefix Acquisition Configuration Example - HPE FlexNetwork 10500 Series Configuration Manual

Will expire on Mar 27 2014 at 08:06:57 (198 seconds left)
DNS server addresses:
2000::FF
Domain name:
example.com
SIP server addresses:
2:2::4
SIP server domain names:
bbb.com
# Verify that the client has created a dynamic DHCPv6 option group for saving configuration
parameters.
[Switch] display ipv6 dhcp option-group 1
DHCPv6 option group: 1
DNS server addresses:
Type: Dynamic (DHCPv6 address allocation)
Interface: Vlan-interface2
2000::FF
Domain name:
Type: Dynamic (DHCPv6 address allocation)
Interface: Vlan-interface2
example.com
SIP server addresses:
Type: Dynamic (DHCPv6 address allocation)
Interface: Vlan-interface2
2:2::4
SIP server domain names:
Type: Dynamic (DHCPv6 address allocation)
Interface: Vlan-interface2
bbb.com
# Verify that the DHCPv6 client has obtained an IPv6 address..
[Switch] display ipv6 interface brief
*down: administratively down
(s): spoofing
Interface
Vlan-interface2

IPv6 prefix acquisition configuration example

Network requirements
As shown in
the DHCPv6 server. The parameters include IPv6 prefix, DNS server address, domain name suffix,
SIP server address, and SIP server domain name.
Figure 80, configure the switch to use DHCPv6 to obtain configuration parameters from
Physical Protocol
up up
220
IPv6 Address
1:1::2