Displaying And Maintaining The Dhcp Relay Agent - HPE FlexNetwork 10500 Series Configuration Manual

Procedure
To configure the DHCP relay agent to discard the DHCP requests that are delivered from VXLAN
tunnels
Step
1. Enter system view.
2. Enter interface view.
3. Configure the DHCP relay
agent to discard the DHCP
requests that are delivered
from VXLAN tunnels.

Displaying and maintaining the DHCP relay agent

Execute display commands in any view and reset commands in user view.
Task
Display information about DHCP servers on an
interface.
Display Option 82 configuration information on the
DHCP relay agent.
Display relay entries on the DHCP relay agent.
Display packet statistics on the DHCP relay agent.
Display MAC address check entries on the DHCP
relay agent.
Clear relay entries on the DHCP relay agent.
Clear packet statistics on the DHCP relay agent.
Command
system-view
interface vsi-interface vsi-number
dhcp relay request-from-tunnel
discard
Command
display dhcp relay server-address [ interface
interface-type interface-number ]
display dhcp relay information [ interface
interface-type interface-number ]
display dhcp relay client-information [ interface
interface-type interface-number | ip ip-address
[ vpn-instance vpn-instance-name ] ]
display dhcp relay statistics [ interface
interface-type interface-number ]
display dhcp relay check mac-address
reset dhcp relay client-information [ interface
interface-type interface-number | ip ip-address
[ vpn-instance vpn-instance-name ] ]
reset dhcp relay statistics [ interface interface-type
interface-number ]
80
Remarks
N/A
N/A
By default, the DHCP relay agent
can forward the DHCP requests
that are delivered from VXLAN
tunnels.
If you configure this command on
a device that acts as both the
distributed and centralized
VXLAN IP gateways, make sure
the gateways do not use the same
VSI interface to provide the
gateway services.