Verifying The Configuration - HPE FlexNetwork 10500 Series Configuration Manual

Layer 3-ip services
Table of Contents

Advertisement

# Specify the multicast address 224.0.0.1 as the destination IP address for RAs sent by
VLAN-interface 2.
[SwitchA-Vlan-interface2] ip irdp multicast
# Specify the IP address 192.168.1.0 and preference 400 for VLAN-interface 2 to
proxy-advertise.
[SwitchA-Vlan-interface2] ip irdp address 192.168.1.0 400
2.
Configure Switch B:
# Specify an IP address for VLAN-interface 2.
<SwitchB> system-view
[SwitchB] interface vlan-interface 2
[SwitchB-Vlan-interface2] ip address 10.154.5.2 24
# Enable IRDP on VLAN-interface 2.
[SwitchB-Vlan-interface2] ip irdp
# Specify preference 500 for advertised IP addresses on VLAN-interface 2.
[SwitchB-Vlan-interface2] ip irdp preference 500
# Specify the multicast address 224.0.0.1 as the destination IP address for RAs sent by
VLAN-interface 2.
[SwitchB-Vlan-interface2] ip irdp multicast
# Specify the IP address 192.168.2.0 and preference 400 for VLAN-interface 2 to
proxy-advertise.
[SwitchB-Vlan-interface2] ip irdp address 192.168.2.0 400

Verifying the configuration

# Display the routing table for Host A.
[HostA@localhost ~]$ netstat -rne
Kernel IP routing table
Destination
10.154.5.0
192.168.1.0
192.168.2.0
0.0.0.0
The output shows that the default route on Host A points to IP address 10.154.5.1, and Host A has
routes to 192.168.1.0/24 and 192.168.2.0/24.
# Display the routing table for Host B.
[HostB@localhost ~]$ netstat -rne
Kernel IP routing table
Destination
10.154.5.0
192.168.1.0
192.168.2.0
0.0.0.0
The output shows that the default route on Host B points to IP address 10.154.5.1, and Host B has
routes to 192.168.1.0/24 and 192.168.2.0/24.
Gateway
Genmask
0.0.0.0
255.255.255.0
0.0.0.0
255.255.255.0
0.0.0.0
255.255.255.0
10.154.5.1
0.0.0.0
Gateway
Genmask
0.0.0.0
255.255.255.0
0.0.0.0
255.255.255.0
0.0.0.0
255.255.255.0
10.154.5.1
0.0.0.0
Flags Metric Ref
U
0
U
0
U
0
UG
0
Flags Metric Ref
U
0
U
0
U
0
UG
0
138
Use Iface
0
0 eth1
0
0 eth1
0
0 eth1
0
0 eth1
Use Iface
0
0 eth1
0
0 eth1
0
0 eth1
0
0 eth1

Advertisement

Table of Contents
loading

Table of Contents