Solution - HPE FlexNetwork 10500 Series Configuration Manual
Layer 3-ip services
Hide thumbs
Also See for FlexNetwork 10500 Series:
- Security command reference (881 pages) ,
- Security configuration manual (702 pages) ,
- Network management and monitoring command reference (423 pages)
Table of Contents
Advertisement
Solution
1.
Execute the display ip routing-table command on Device A and Device C to view whether
Device A has a route over tunnel 1 to 10.2.0.0/16 and whether Device C has a route over tunnel
1 to 10.1.0.0/16.
2.
If such a route does not exist, execute the ip route-static command in system view to add the
route. Take Device A as an example:
[DeviceA] ip route-static 10.2.0.0 255.255.0.0 tunnel 1
283
Advertisement
Table of Contents
Troubleshooting
