Displaying And Maintaining The Dhcpv6 Relay Agent - HPE FlexNetwork 10500 Series Configuration Manual
Layer 3-ip services
Hide thumbs
Also See for FlexNetwork 10500 Series:
- Security command reference (881 pages) ,
- Security configuration manual (702 pages) ,
- Network management and monitoring command reference (423 pages)
Table of Contents
Advertisement
Step
1.
Enter system view.
2.
Enter interface view.
3.
Specify the source IPv6
address for relayed DHCPv6
requests.
Displaying and maintaining the DHCPv6 relay
agent
Execute display commands in any view and reset commands in user view.
Task
Display the DUID of the local device.
Display DHCPv6 relay entries that record
clients' IPv6 address information.
Display DHCPv6 relay entries that record
clients' IPv6 prefix information.
Display DHCPv6 server addresses
specified on the DHCPv6 relay agent.
Display packet statistics on the DHCPv6
relay agent.
Clear DHCPv6 relay entries that record
clients' IPv6 address information.
Clear DHCPv6 relay entries that record
clients' IPv6 prefix information.
Clear packets statistics on the DHCPv6
relay agent.
Command
system-view
interface interface-type
interface-number
ipv6 dhcp relay
source-address
{ ipv6-address | interface
interface-type
interface-number }
Command
display ipv6 dhcp duid
display ipv6 dhcp relay client-information address
[ interface interface-type interface-number | ipv6
ipv6-address ] [ vpn-instance vpn-instance-name ]
display ipv6 dhcp relay client-information pd [ interface
interface-type interface-number | prefix prefix/prefix-len ]
[ vpn-instance vpn-instance-name ]
display ipv6 dhcp relay server-address [ interface
interface-type interface-number ]
display ipv6 dhcp relay statistics [ interface interface-type
interface-number ]
reset ipv6 dhcp relay client-information address [ interface
interface-type interface-number | ipv6 ipv6-address ]
[ vpn-instance vpn-instance-name ]
reset ipv6 dhcp relay client-information pd [ interface
interface-type interface-number | prefix prefix/prefix-len ]
[ vpn-instance vpn-instance-name ]
reset ipv6 dhcp relay statistics [ interface interface-type
interface-number ]
213
Remarks
N/A
N/A
By default, the DHCPv6 relay agent
uses the global unicast IPv6
address of the interface that
connects to the DHCPv6 server as
the source IPv6 address for relayed
DHCPv6 requests.
If the specified interface does not
have an IPv6 global unicast
address, the IPv6 address of the
output interface is used as the
source address for relayed DHCPv6
requests.
Advertisement
Table of Contents
Troubleshooting
