Table of Contents
Advertisement
Quick Links
HPE 1410-16G Switch Quick Setup Guide
For more detailed information to set up your switch, view or download the Installation and Getting Started
Guide for your switch at:
http://www.hpe.com/networking/support
1. Unpack and check included parts.
2. Prepare for installation. To avoid personal injury or product damage, review the
3. Connect power and verify that the Switch Power LED turns on. The switch does not contain a power switch. It is turned
on by connecting power through the AC power adapter supplied with your switch
© Copyright 2011, 2016 Hewlett Packard Enterprise Development LP
The information in this document is subject to change without notice.
Part Number: 5998-1369R
Published: January 2016
Switch
Accessory kit (installation hardware)
AC power adapter (and power cord, if applicable)
Documentation kit
"Safety Precautions" (page
3).
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HPE 1410-16G
Summary of Contents for HPE 1410-16G
- Page 1 HPE 1410-16G Switch Quick Setup Guide For more detailed information to set up your switch, view or download the Installation and Getting Started Guide for your switch at: http://www.hpe.com/networking/support 1. Unpack and check included parts. Switch Accessory kit (installation hardware)
- Page 2 4. Install the Switch Hardware. Turn off the switch before installing the switch hardware. Table or desktop: Attach the four self-adhesive pads (included in the accessory kit) to the bottom corners of the switch. Wall or Under-Table: A special kit for wall-mounting (or under-table mounting) is included.
-
Page 3: Safety Precautions
6. Power on the Switch. Use the cable tie strap to secure the connection. 7. Connect network cables. Safety Precautions To avoid personal injury or product damage when installing your switch, read the installation precautions and guidelines below. Installation Precautions WARNING! The rack or cabinet should be adequately secured to prevent it from becoming unstable, tilting or falling. - Page 4 For the air flow direction, see the Installation and Getting Started Guide for your product, located on the Hewlett Packard Enterprise Networking web site at: http://www.hpe.com/networking/support For additional Safety and Regulatory information, refer to the Safety and Regulatory documentation...
- Page 5 Wall Mounting Template for HPE 1410-16G Switch Safety and Regulatory Information for HPE 1410-16G Switches HPE 1410-16G Switch (J9560A) Electrical: For power, the switch requires a connection to an external power adapter. Use only the external power adapter module supplied with this product. Power adapter module specifications are provided below.
- Page 6 Lasers: EN 60825-1:2007 / IEC 60825-1:2007 Class 1 Class 1 Laser Products / Laser Klasse 1 HPE 1410-8G (J9559A), 1410-16G (J9560A), 1410-24G (J9561A) Switches: External Power Adapter and Power Cords: External AC/DC Power Power Cords for External AC/DC Power Adapter...
-
Page 7: Japan Power Cord Warning
Japan Power Cord Warning: Russia/Belarus/Kazakhstan/CEE Safety: European Community Declaration of Conformity Regulatory information For important safety, environmental, and regulatory information, see Safety and Compliance Information for Server, Storage, Power, Networking, and Rack Products, available at http://www.hpe.com/support/ Safety-Compliance-EnterpriseProducts. -
Page 8: Documentation Feedback
Documentation Feedback (docsfeedback@hpe.com). When submitting your feedback, include the document title, part number, edition, and publication date located on the front cover of the document. For online help content, include...
Need help?
Do you have a question about the 1410-16G and is the answer not in the manual?
Questions and answers