Configuring The Dhcpv6 Client; Overview; Dhcpv6 Client Configuration Task List; Configuring Ipv6 Address Acquisition - HPE FlexNetwork 10500 Series Configuration Manual

Layer 3-ip services
Table of Contents

Advertisement

Configuring the DHCPv6 client

Overview

With DHCPv6 client configured, an interface can obtain configuration parameters from the DHCPv6
server.
A DHCPv6 client can use DHCPv6 to complete the following functions:
Obtain an IPv6 address, an IPv6 prefix, or both, and obtain other configuration parameters. The
client automatically creates a DHCPv6 option group for the obtained parameters. With the
obtained IPv6 prefix, the client can generate its global unicast address.
Support stateless DHCPv6 to obtain configuration parameters except IPv6 address and IPv6
prefix. The client obtains an IPv6 address through stateless IPv6 address autoconfiguration. If
the client receives an RA message with the M flag set to 0 and the O flag set to 1 during address
acquisition, stateless DHCPv6 starts.
Do not configure the DHCPv6 client on the same interface as the DHCPv6 server or the DHCPv6
relay agent.

DHCPv6 client configuration task list

Tasks at a glance
(Required.) Perform one of the following tasks:

Configuring IPv6 address acquisition

Configuring IPv6 prefix acquisition
Configuring IPv6 address and prefix acquisition
Configuring stateless DHCPv6
(Optional.)
Configuring the DHCPv6 client DUID
(Optional.)
Setting the DSCP value for DHCPv6 packets sent by the DHCPv6 client
Configuring IPv6 address acquisition
Step
1.
Enter system view.
2.
Enter interface view.
3.
Configure the interface to
use DHCPv6 to obtain an
IPv6 address and other
configuration parameters.
Command
system-view
interface interface-type
interface-number
ipv6 address dhcp-alloc
[ option-group group-number |
rapid-commit ] *
216
Remarks
N/A
Supported interfaces include
Layer 3 Ethernet interface, Layer
3 Ethernet subinterface, Layer 3
aggregate interface, Layer 3
aggregate subinterface, and
VLAN interface.
By default, the interface does not
use DHCPv6 for IPv6 address
acquisition.

Advertisement

Table of Contents
loading

Table of Contents