– Raise the bonnet.
⇒ F ig. 158
– Move the loop
remove the cover.
⇒ F ig. 159
– Remove connector
– Unclip the retainer spring
right.
– Extract the bulb and fit the replacement so that the lug on the
base fits into the recess on the reflector.
– Fit the connector.
– Fit the cover and close the strap. Make sure that the gasket sits
well on the casing cover during the operation.
– Check whether the new bulb is working.
Side light
Safety
in the direction of the arrow and
1
from the bulb.
2
⇒ F ig. 159
pressing inwards to the
3
Fig. 160 Side lights.
Operation
– Raise the bonnet.
⇒ F ig. 158
– Move the loop
remove the cover.
– Remove the bulb holder
– Replace the bulb by pulling it out and inserting the replace-
ment.
– Installation is done in the reverse order.
Double headlight bulb change
Double headlight bulbs
Side lights
A
Main beam headlights
B
Dipped beam headlights
C
Turn signal lights
D
Advice
If and when
in the direction of the arrow and
1
⇒ F ig. 160
outwards.
4
Fig. 161 Double head-
light.
Technical specifications
221