Seat Ibiza Owner's Manual page 48

46 Cockpit
The multifunction display (MFD)*
The multifunction display (MFI) shows you information on the jour-
ney and fuel consumption. It has two automatic memories: 1 - Trip
memory and 2 - Total memory. The selected memory will be shown
in the upper right-hand corner of the display.
Selecting a memory
– With the ignition switched on, briefly press button
on the window wiper lever to move from one memory to anoth-
er.
Resetting a memory
– Select the memory that you would like to reset.
– Press and hold button
2 seconds.
The trip memory 1 collects the travel and consumption rates from the mo-
ment the ignition is switched on until it is switched off. If the journey is con-
tinued within two hours of switching off the ignition, the new values will be
Fig. 37 Windscreen wip-
er lever: button
rocker switch
⇒ F ig. 37
on the window wiper lever for at least
A
added to the existing trip recorder memory. The memory will automatically
be deleted if the journey is interrupted for more than 2 hours.
The total memory 2 collects the trip data for any number of individual jour-
neys (even if the ignition is switched off for longer than 2 hours) up to a to-
tal of 19 hours and 59 minutes travel time or 1,999 km distance travelled.
The memory will automatically be deleted if one of the named values is
reached.
You can switch between the following displays in the multi-function display
(MFD) by operating rocker switch
Memory displays
and
A
● Driving speed
.
B
● Journey duration
● Average speed
● Distance
● Operating range
● Average fuel consumption
● Current fuel consumption
● Outside temperature indicator
A
● Speed warning
km/h - Driving speed
Driving speed is digitally shown in the display.
min - Journey duration
The display shows the amount of time which has elapsed since the ignition
was switched on.
The maximum display value in both memories is 19 hours and 59 minutes.
The memory will automatically be deleted once this value has been
reached.
⇒ F ig. 37
in the windscreen wiper lever:
B
