Bulb Change - Seat 2005 Toledo Owner's Manual

254 If and when
Position in engine compartment: Side box
Fuses
Number
B1
C1
D1
E1
F1
G1
H1
Some of the electrical items listed in the table are only fitted on certain
models or are optional extras.
Please note that the above list, while correct at the time of printing, is subject
to alterations.

Bulb change

General notes
Before changing any bulb, first turn off the equipment concerned.
Do not touch the bulb glass. Fingerprints vaporise in the heat, causing a
reduction in the bulb life and condensation on the mirror surface, thus
reducing efficiency.
Alternator < 140 W
Alternator > 140 W
Power steering servo
Multi-terminal voltage supply "30". Internal fuse box
Ventilator > 500 W / Ventilator < 500 W
PTCs (Supplementary electrical heating using air)
PTC (Supplementary electrical heating using air)
Central locking control unit
Consumer
A bulb should only be replaced by one of the same type. The type is inscribed
on the bulb, either on the glass part or on the base.
It is highly recommended to keep a box of spare bulbs in the vehicle. At the
very least, the bulbs that most affect road safety should have spares in the
vehicle.
Main headlights
Dipped beam - H7
Main beam - H1
Position - W5W
Turn signals - PY21W
Amperes
150
200
80
100
80/50
80
40