Seat Ibiza Owner's Manual page 225

– Move the loop in the direction of the arrow and remove the
1
⇒ F ig.
cover 164.
⇒ F ig. 165
– Remove connector
– Extract the bulb and fit the replacement so that it sits correctly
into the cut-out on the reflector.
– Installation involves all of the above steps in reverse sequence.
– Fit the cover and close the strap. Make sure that the gasket sits
well on the casing cover during the operation.
– Check whether the new bulb is working.
Dipped beam
Safety
by pulling outward.
2
Fig. 166 Dipped beam
headlights.
Operation
– Raise the bonnet.

⇒ F ig. 166
– Move the loop
remove the cover.
⇒ F ig. 167
– Remove connector
– Unclip the retainer spring
right.
– Extract the bulb and fit the replacement so that the lug on the
base fits into the recess on the reflector.
– Fit the connector.
– Fit the cover and close the strap. Make sure that the gasket sits
well on the casing cover during the operation.
– Check whether the new bulb is working.
Advice
If and when
Fig. 167 Dipped beam
headlights.
in the direction of the arrow and
1
from the bulb.
2
⇒ F ig. 167
pressing inwards to the
3
Technical specifications
223
