Bluetooth System - Seat Ibiza Owner's Manual

64 Communications and multimedia
1)
Key functions
If there is an incoming
Press once: accept call
call
During a call. Press once: it ends the call
Press once: the PND goes into telephone mode (if
not already in this mode).
Without an incoming
Press twice: opens the call history of the tele-
call phone connected to the PND.
Press three times: the first number in the call his-
tory is called.
Press once: the PND will display the message
If no telephone is con-
" There is no telephone connected, please connect a
nected
telephone

Bluetooth System*

General information
This system allows you to connect your mobile phone via Bluetooth connec-
tion and to use the hands-free mode.
The hands-free device means that the telephone can be used inside the ve-
hicle; the driver will not have to remove their hands from the steering wheel
nor will be distracted from traffic.
Available functions include making calls in hands-free mode, access to the
mobile phone address book, access to the call list and control of the voice
recognition system.
1)
If a telephone is already connected via Bluetooth to the PND.
".
Before using the Bluetooth system, the mobile phone should be connected
to the vehicle installation via Bluetooth ⇒ p age 66.
Switching on/off
The Bluetooth system is activated when the ignition is turned on and it is
deactivated when the key is removed from the ignition.
With the system activated, if the button
voice control activates, and if there is no telephone connected, Bluetooth
visible is turned on and a search for a telephone is begun.
If there is a call in process when the system is deactivated, the active call is
not cancelled, but transferred to the mobile phone.
Bluetooth

Use compatible Bluetooth devices only. For more information about compat-
ible Bluetooth products, consult your dealership or the SEAT website.
Some Bluetooth mobile phones are detected and connected automatically
when the ignition is switched on. For this to take place the telephone must
be switched on and its Bluetooth function activated, and there must be no
active Bluetooth connection from other devices.
Bluetooth connections are free.
®
Bluetooth is a registered trademark of Bluetooth
Declaration of conformity
S1nn GmbH & Co. KG certifies that the UHV High unit complies with the ba-
sic requirements and the rest of the relevant provisions of the Directive
1999/5/CE. A copy of the declaration of conformity can be found at http://
www.s1nn.de/certifications/uhv-high-manual .
⇒ F ig. 45
 ("PTT") is pressed the
®
SIG, Inc.
