Bulb Change - Seat 2007 Cordoba Owner's Manual

Number
10
11
12
13
14
15
16

Bulb change

General notes
Before changing any bulb, first turn off the equipment concerned.
Do not touch the bulb glass. Fingerprints vaporise in the heat, causing a
reduction in the bulb life and condensation on the mirror surface, thus
reducing efficiency.
A bulb should only be replaced by one of the same type. The type is inscribed
on the bulb, either on the glass part or on the base.
It is highly recommended to keep a box of spare bulbs in the vehicle. At the
very least, the bulbs that most affect road safety should have spares in the
vehicle.
Rear lights on frame
Brake/position 12V/P21/5W
Turn signals 12V/P21W
Safety First
Cable control unit
Clima fan
Vacant
Jatco unit for automatic gearbox
Vacant
Vacant
Vacant
Operating instructions
Consumer
Rear lights on tailgate
small position light 12V/W5W
antifog lamp 12V/P21W
reverse lamp 12V/P21W
Single reflector headlamps*
full beam/dipped 12V 60/55W (H4)
turn signals 12V/PY21W
position lights 12/W5W
Double reflector headlamps
dipped beam 12V/55W (H7)
roadway 12V/55W (H3)
turn signals 12V/PY21W
position lights 12V/W5W
7)
Xenon headlights
Dipped beam 12V/35W (D1S)
roadway 12V/55W (H7)
Tips and Maintenance
If and when
Amperes
5
5
5
8)
Technical Data
211