Remove the bulb holder
⇒ F ig. 174
– Remove connector
– Turn the bulb holder
– Remove the bulb by pressing on the bulb holder and turning it
anti-clockwise at the same time.
– Installation involves all of the above steps in reverse sequence.
– Check that the bulb works properly.
Safety
Fig. 174 Fog light.
from the bulb.
1
⇒ F ig. 174
to the left and pull.
2
Operation
Changing the rear bulbs
Applies to the model: IBIZA / IBIZA SC
Summary of LED tail lights
LED
● Brake lights
● Side lights
Bulbs
● Retro fog light
● Reverse lights
● Turn signal
Advice
If and when
Technical specifications
227