222
If and when
Side light
– Raise the bonnet.
– Move the loop
in the direction of the arrow and remove the
1
⇒ F ig.
cover
162.
– Remove connector
– Remove the bulb by pulling it out and fitting the new one.
– Installation involves all of the above steps in reverse sequence.
Fig. 162 Side lights.
Fig. 163 Side lights.
⇒ F ig. 163
by pulling outward.
2
– Fit the cover and close the strap. Make sure that the gasket sits
well on the casing cover during the operation.
– Check whether the new bulb is working.
Main beam headlight
– Raise the bonnet.
Fig. 164 Main beam
headlight.
Fig. 165 Main beam
headlight.