Seat Ibiza Owner's Manual page 216

214 If and when
Note
● A new bottle of sealant can be purchased at SEAT dealerships.
● Take into account the separate Instructions Manual of the tyre mobility
set* manufacturer.
Contents of the tyre mobility set*
The tyre mobility set is located underneath the floor covering in the luggage
compartment. It includes the following components
Tyre valve remover
1
Sticker indicating maximum speed "max. 80 km/h" or "max. 50 mph"
2
Filler tube with cap
3
Air compressor
4
1)
It can also be integrated in the compressor.
2)
In its place, the compressor may have a button.
Tube for inflating tyres
5
Warning provided by tyre pressure monitoring system
6
Air bleed screw
7
ON/OFF switch
8

12 volt connector
9
Bottle of sealant
10
Spare tyre valve
11
The valve insert remover
The valve insert can only be screwed or unscrewed in this way. This also ap-
plies to its replacement part
Sealing and inflating a tyre
Sealing a tyre
● Unscrew the tyre valve cap.
● Use the enclosed extractor to unscrew the valve insert
and place the valve insert on a clean surface.
Fig. 152 Standard repre-
● Vigorously shake the sealant bottle
sentation: contents of
the tyre mobility set.
● Screw the inflator tube
a clockwise direction. The seal on the mouth of the bottle moves automati-
cally.
⇒ F ig.
152:
● Remove the lid from the filling tube
end of the tube into the tyre valve.
● Hold the tyre sealant can upside down and fill the complete contents of
the can into the tyre.
2)
has a gap at the lower end for a valve insert.
1
.
11
⇒ F ig. 152
for several seconds.
10
⇒ F ig. 152
securely into the sealant bottle in
3
⇒ F ig. 152
and screw the open
3
1)

⇒ F ig. 152
1
