Recover From A Card Problem State On A Stack - Dell S4048–ON Configuration Manual

Recover from a Card Problem State on a Stack

If a unit added to a stack has a different Dell Networking OS version, the unit does not come online and Dell Networking OS cites a
card problem error.
To recover, disconnect the new unit from the stack, change the Dell Networking OS version to match the stack, and then reconnect
it to the stack.
Example of Card Problem Error on a Stack - Different Dell Networking OS Versions
stack-1#show system brief
Stack MAC : 00:01:e8:8a:fd:6e
Reload Type : normal-reload [Next boot : normal-reload]
-- Stack Info --
Unit UnitType Status
-----------------------------------------------------------
0 Standby card problem S4810 unknown
1 Management online
2 Member not present
3 Member not present
4 Member not present
5 Member not present
6 Member not present
7 Member not present
8 Member not present
9 Member not present
10 Member not present
11 Member not present
-- Power Supplies --
Unit Bay Status Type FanStatus
------------------------------------
0 0 down DC
0 1 up DC
1 0 absent absent
1 1 up AC
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed
--------------------------------------------
0 0 up
0 1 up
1 0 up
1 1 up
Speed in RPM
stack-1#
ReqTyp CurTyp
S4810 S4810
down
up
up
up 9360 up 9360
up 9600 up 9360
up 6720 up 6720
up 6960 up 6720
Version Ports
64
8-3-10-223 64
841
Stacking