R1(conf-lldp)#no multiplier
R1(conf-lldp)#show config
!
protocol lldp
advertise dot1-tlv port-protocol-vlan-id port-vlan-id
advertise dot3-tlv max-frame-size
advertise management-tlv system-capabilities system-description
no disable
R1(conf-lldp)#
Debugging LLDP
You can view the TLVs that your system is sending and receiving.
To view the TLVs, use the following commands.
•
View a readable version of the TLVs.
debug lldp brief
•
View a readable version of the TLVs plus a hexadecimal version of the entire LLDPDU.
debug lldp detail
Figure 84. The debug lldp detail Command — LLDPDU Packet Dissection
Relevant Management Objects
Dell Networking OS supports all IEEE 802.1AB MIB objects.
The following tables list the objects associated with:
•
received and transmitted TLVs
510
Link Layer Discovery Protocol (LLDP)